Sustainability indicators of water sharing compacts

There is an increasing crisis of fresh water availability throughout the world. Sharing the available water resources in a sustainable manner among numerous stakeholders in the backdrop of this crisis is more challenging. Very often water conflicts are triggered out in this challenging scenario. These conflicts are sometimes reconciled with compacts on sharing. Water sharing compacts on both surface and aquifer resources are very common. Whether these compacts are founded on postulates of sustainability is the important question we want to investigate. Conflicts resurface when the sustainability of a compact is at stake. In this paper, we are reviewing three compacts on surface water sharing to understand their sustainability perspectives and how it has helped addressing conflicts. An introduction to various legal instruments promulgated aiming water conflict abatement is given first. Different types of water sharing agreements being signed in the current water management practice are also looked into. Theoretical background of sustainability analysis, both quantitative and qualitative, applicable in the case of water sharing models is then discussed. This is followed by specific case study analysis of three interstate water sharing agreements executed in basins of different agro-climatic regions across the world. It includes the Colorado basin (USA), Murray Darling basin (Australia) and the Parambikulam Aliyar Project (PAP) basins (India). Interstate water sharing agreement of these basins is critically examined and compared to comment on its sustainability perspective. The Murray Darling basin and its compact appear to be better in its overall considerations of sustainability. Compared to Colorado and Murray Darling, PAP requires major revisions in its sustainability context. E flows and stochastic modeling are the thrust areas of PAP that require major revision.     

Partial characterization of the exopolysaccharide from Oscillatoria trichoides Szafer and the role of released polysaccharide in sequestration of Cr6+

The structural investigation and the chromium adsorptive potential of an exopolysaccharide (EPS) released during the growth of an indigenous cyanobacterium, Oscillatoria trichoides Szafer, were investigated in a laboratory‐scale study. The results showed that, of the total EPS produced, 410.53 milligrams/gram (mg g^?1) were released polysaccharides (RPS) and 11.36 mg g^?1 were capsular polysaccharides (CPS). The sorption of hexavalent chromium (Cr⁶⁺) by the RPS achieved a maximum amount of metal removal (q_max) value of 76.92 mg g^?1 of polysaccharide dry weight. The highest coefficient of determination (0.9742) for the Langmuir adsorption model indicates best fitness of the model in explaining the sorption as a unilayer process. Equilibrium studies indicated that 30 to 40 milligrams per liter initial chromium concentration and a pH of 2 were optimal for biosorption of chromium by the RPS. Scanning electron microscopy with energy‐dispersive X‐ray spectroscopy analysis of Cr⁶⁺‐treated RPS showed the presence of 3.76% bound chromium. Compositional analysis of the EPS showed the presence of carbohydrates, proteins, pyruvic acid, and hexosamines. High‐performance liquid chromatography analysis demonstrated the presence of hexoses, as neutral sugars and glucuronic acid as an acidic sugar. The presence of carboxylic groups was also detected by infrared spectroscopy. The presence of these chemical constituents may serve as binding sites for the metal ions; therefore, the RPS of this species appears to be a promising biosorbent for Cr⁶⁺.     

Modification of Thermo-Mechanical Properties of Recycled PET by Vinyl Acetate (VAc) Monomer Grafting Using Gamma Irradiation

Vinyl acetate (VAc) monomer of different percentage was grafted onto the recycled polyethylene terephthalate (r-PET) films using gamma irradiation. The properties of these modified films were characterized by Fourier transform infrared spectroscopy (FTIR), mechanical properties testing (Tensile strength, Elongation at break), dynamic mechanical analysis (DMA) and thermo-gravimetric analysis (TGA). The Tensile Strength (TS) of the modified PET film increased by 132.25?% to the highest value of 50.12 MPa at 15% VAc monomer concentration at 3 kGy gamma dose, while the elongation at break (EB) decreased by 31.83?%. FTIR was used to investigate the molecular interaction of the modified films. TGA revealed that curve of the modified PET film shifted toward higher temperature region by 95?°C, which is very close to that of PET film made from virgin flakes. The results indicate that modified PET films of better mechanical and thermal properties were successfully prepared using VAc monomer grafting by gamma irradiation technique.     

Interactive Influence of Biofiber Composition and Elastomer on Physico-Mechanical Properties of PLA Green Composites

The objective of this work was to improve the impact and thermal properties of polylactic acid (PLA)-based biocomposite by appropriate application of cellulosic fiber and a bioelastomer. Biocomposites formulations with fiber contents of up to 20% in combination with a bioelastomer were extrusion-compounded in a twin-screw extruder followed by molding in an injection molding system. Fibers used in the formulations included three types of cellulosic fiber; namely, raw fiber from oat hull biomass (RF), hydrolysis byproduct (ATF) which was the solid fraction obtained from an acid-catalyzed hydrolysis of RF, and delignified fibers (AD30, AD65, AD100) which were the products of delignification of ATF. Formulated biocomposites were characterized for thermal (glass transition and melting temperatures, and enthalpy of melting) and physico-mechanical (tensile and bending strengths, stiffness, impact energy, and water absorption) properties. Among all types of biofibers, RF resulted in poor properties in the biocomposites due to the high hemicellulose content in the structure. On the other hand, the ratio of lignin to cellulose (in the absence of hemicellulose) in the modified fibers did not significantly affect the physico-mechanical and thermal properties of the biocomposites. The elastomer applied in the formulations improved the impact energy, thermal properties, and elongation at break of the composites. However, it adversely affected the strength and water resistance of biocomposites, especially in the presence of hemicellulose. The results indicated that, depending on the application, a wide range of PLA green composites with different physico-mechanical properties can be achieved.     

Factors Affecting Predator-Prey Distribution in a Protected Area,Tehran, Iran (a Case with Wolves and Wild Sheep)

We tried to model habitat suitability of two prey and predator species including wild sheep (Ovis orientalis) and wolf (Canis lupus) in Varjin protected area located in northern east of Tehran using a presence only method, maximum entropy (MaxEnt). Totally 11 environmental variables were measured in the species presence points which can be classified in three groups including topographical, vegetation and distal variables. Resulted maps indicated that habitat variables such as slope (ranging from 35 to 40 percent) and elevation (lower than 1700 meters above sea level) are both institute those factors which mostly affect studied prey and predator habitat use. Our results regarding prey and predator geographical range of used habitat indicated that wolves cover most area than wild sheep which show more dispersed habitat resources for the prey species. ENMTools test revealed that wolf’s niche breadth is more than twice as much as wild sheep’s. Wild sheep in Varjin protected area has a relatively narrow geographical extent and shows a tendency to marginal habitats while wolves cover obviously more areas which denotes its high mobility and low dependency to specific habitats.     

Modeling the decline of labor-sharing in the semi-desert region of Chile

Regional Environmental Change - The rapid environmental changes currently underway in many dry regions of the world, and the deep uncertainty about their consequences, underscore a critical...     

The socio-economic vulnerability of the Australian east coast grazing sector to the impacts of climate change

Regional Environmental Change - Research that projects biophysical changes under climate change is more advanced than research that projects socio-economic changes. There is a need in adaptation...     

The spillover of race and racial attitudes into public opinion about climate change

The relationship between racial attitudes and public opinion about climate change is examined. Public opinion data from Pew and American National Election Studies surveys are used to show that racial identification and prejudices are increasingly correlated with opinions about climate change during the Obama presidency. Results show that racial identification became a significant predictor of climate change concern following Obama’s election in 2008, and that high levels of racial resentment are strongly correlated with reduced agreement with the scientific consensus on climate change. These results offer evidence for an effect termed the spillover of racialization. This helps further explain why the public remains so polarized on climate change, given the extent to which racial grievances and identities have become entangled with elite communication about climate change and its related policies today.     

Supervisor expediency to employee expediency: The moderating role of leader–member exchange and the mediating role of employee unethical tolerance

We utilize social learning theory to test the role‐modeling effect of supervisor expediency (i.e., a supervisor's use of unethical practices to expedite work for self‐serving purposes). In particular, we examine the relationship between supervisor expediency and employee expediency, as moderated by leader–member exchange (LMX) and mediated by employee unethical tolerance. We predict that employees are more likely to model their supervisors' expedient behaviors when their relationship is characterized by high‐LMX (a high‐quality exchange relationship that is rich in socioemotional support). Furthermore, we argue that supervisor expediency, especially when LMX is high, influences employees' attitudes of unethical tolerance, which then affects employees' expedient behaviors. Across 2 multisource field studies and a third time‐lagged field study, we found general support for our theoretical predictions. Theoretical and practical implications are discussed.